Black Decker Network Card CA DHWK User Manual

CA-DHWK Universal Power Adapter with Fused Link Harness

Package Contents:

(1) CA-DHWK - Universal Power Adapter for Motorcycles, ATVs, etc.

WARNING!

To prevent accidental vehicle start up, which could cause serious

injury or death, disconnect battery cables before installing.

CA-DHWK

Universal Power Adapter

for Motorcycles, ATVs, etc.

Battery Disconnect

Attach 12V Socket Adapter to Battery Harness

Step 1. Connect the double-pin connector on the 12V socket adapter

to the double-pin connector on the battery harness.

WARNING!

Disconnect negative (-) battery cable ﬁrst. If positive

(+) cable should contact ground with negative (-) cable

still connected, the resulting sparks can cause a battery

explosion, which could result in serious injury or death.

Positive

Negative

12V power socket

Step 2. Carefully reconnect vehicle battery cables. Insert a 12V

accessory into the 12V socket to power your mobile device

(not included, sold separately).

Vehicle battery

Install Battery Harness to Battery Posts

Step 1. Attach the positive (Red) lead of the harness to the

positive (+) battery post.

Step 2. Attach the negative (Black) lead of the harness to the

negative (+) battery post.

Red

Fuse

Black

Safety Precautions

The Mobile Mounting Specialists™

Follow all manufacturer safety guidelines for operating your device.

Failure to practice safe usage while operating your device while

driving may result in damage, injury, or death.

Consumer Hotline:

USA (800) 841-0884

INT’L (626) 254-9005

Monday - Friday 9am-5pm, PST

Arcadia, CA 91006 USA

Designed in USA Made in China

Arkon is not responsible for any damages caused to your vehicle,

your device, or yourself due to the installation or use of this mount.